How to Flashing Samsung Galaxy Mini 2 GT-S6500

Samsung Galaxy Mini 2 GT-S6500 are currently often problematic, whether of software and hardware that often occurs due to negligence of the user. But most often find that damage from the software side. This is not because of factory defects that provide the software, but from the users who actually negligent and did not take the time to install the application or may be tweaked and could even install a custom rom because that is not as recommended. This is the cause of the Galaxy Mini 2 GT-S6500 should do Flashing. For that I am making a way how to cope with the bootloop Galaxy Mini 2 GT-S6500, error, or frequent restarts itself caused by its negligence.
  •     Before Flashing
  1. usb driver  or samsung keis
  2. Odin
  3. Firmware Galaxy GT-S6500 
Tutorial:
  1. extrax firmware Galaxy  Mini 2 GT-S6500 to find files .md5
  2. Install samsung usb driver.
  3. Go to the download mode by press and hold the Home button + Power + Vol.Down simultaneously.
  4. After entering the download mode. Galaxy  Mini 2 GT-S6500 Connect to PC / laptop with a USB cable.
  5. Press the volume up on the Galaxy  Mini 2 GT-S6500 to proceed
  6. Open Odin v3 and run the .exe
  7. Ensure galaxy core has been detected on the PC. There will be a yellow column if it is detected.
  8. If it is detected then check column PDA. Then click on PDA (PDA side which in check) then will be in order to enter file .md5
  9. Klik START
  10. Wait until the process is complete (PASS) Galaxy core the automatic restart. Finished
This Tutorial : How to Flashing Samsung Via Odin3

  •  Good Lucky

How to Flashing Samsung Galaxy Mega 5.8 GT-I9150

How to Flashing / reinstall Samsung Galaxy Mega 5.8 GT-I9150 for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy Mega 5.8 GT-I9150 by pressing three key combination. when the position device off press and hold the Vol Up + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy Mega 5.8 GT-I9150 Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Tab 2 7.0 WiFi GT-P3110 with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so I9150XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Tutorial : How to Flashing Samsung Via Odin3
 
  • GOOD LUCKY

How to Flashing Samsung Galaxy Tab 2 7.0 WiFi GT-P3110


How to Flashing / reinstall Samsung Galaxy Tab 2 7.0 WiFi GT-P3110 for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy Tab 2 7.0 WiFi GT-P3110 by pressing three key combination. when the position device off press and hold the Vol Up + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy Tab 2 7.0 WiFi GT-P3110 Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Tab 2 7.0 WiFi GT-P3110 with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so P3110XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 
  • GOOD LUCKY

How to Flashing Samsung Galaxy Tab 3 8.0 WiFi SM-T311

How to Flashing / reinstall Samsung Galaxy Tab 3 8.0 WiFi SM-T311 for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy Tab 3 8.0 WiFi SM-T311 by pressing three key combination. when the position device off press and hold the Vol Up + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy Tab 3 8.0 WiFi SM-T311 Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Tab 3 8.0 WiFi SM-T311 with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so SM-T311XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 
  • GOOD LUCKY


How to Flashing Samsung Galaxy Note GT-N7000

How to Flashing / reinstall Samsung Galaxy Note GT-N7000 for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy Note GT-N7000 by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy Note GT-N7000 Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Note GT-N7000 with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so N7000XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 
This Tutorial : How to Flashing Samsung Via Odin3
 
  • GOOD LUCKY

How to Flashing Samsung Galaxy Core 2 SM-G355H

How to Flashing / reinstall Samsung  Galaxy Core 2 SM-G355H for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET  Galaxy Core 2 SM-G355H by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy Core 2 SM-G355H Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Core 2 SM-G355H with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so G355HXXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Tutorial : How to Flashing Samsung Via Odin3
 
  • GOOD LUCKY 

How to Flashing Samsung Galaxy S6 SM-G9200


How to Flashing / reinstall Samsung Galaxy S6 SM-G9200 for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy S6 SM-G9200 by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy S6 SM-G9200 Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy S6 SM-G9200 with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so G9200XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Tutorial : How to Flashing Samsung Via Odin3
 
  • GOOD LUCKY 

How to Flashing Samsung Galaxy Ace Advance GT-S6800

How to Flashing / reinstall Samsung Galaxy Ace Advance GT-S6800 for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy Ace Advance GT-S6800 by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy Ace Advance GT-S6800 here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Ace Advance GT-S6800 with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so S6800XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Tutorial : How to Flashing Samsung Via Odin3
 
  • GOOD LUCKY 

How to Flashing Samsung Galaxy Note 2 GT-N7100

How to Flashing / reinstall Samsung Galaxy Note 2 GT-N7100 for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy Note 2 GT-N7100 by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy Note 2 GT-N7100 Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Note 2 GT-N7100 with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so N7100XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Tutorial : How to Flashing Samsung Via Odin3
 
  • GOOD LUCKY 

How to Flashing Samsung Galaxy A5 SM-A500F


How to Flashing / reinstall Samsung Galaxy A5 SM-A500F for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy A5 SM-A500F by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy A5 SM-A500F Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy A5 SM-A500F with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so A500FXXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Tutorial : How to Flashing Samsung Via Odin3
 
  • GOOD LUCKY 

How To Flashing Samsung Galaxy S3 GT-I9300

Samsung Galaxy S3 GT-I9300 are currently often problematic, whether of software and hardware that often occurs due to negligence of the user. But most often find that damage from the software side. This is not because of factory defects that provide the software, but from the users who actually negligent and did not take the time to install the application or may be tweaked and could even install a custom rom because that is not as recommended. This is the cause of the Galaxy S3 GT-I9300 should do Flashing. For that I am making a way how to cope with the bootloop Galaxy S3 GT-I9300, error, or frequent restarts itself caused by its negligence.
  • Before Flashing
  1.  Usb Driver or samsung keis 
  2.  Odin v3.9  
  3. Firmware Galaxy GT-I9300
  • Tutorial
  1. Extrax firmware Galaxy S3 GT-I9300 to find files .md5
  2. Install samsung usb driver
  3. Go to the download mode by press and hold the Home button + Power + Vol.Down simultaneously.
  4. After entering the download mode. Galaxy S3 GT-I9300 Connect to PC / laptop with a USB cable.
  5.  Press the volume up on the galaxy ace3 to proceed
  6. Open Odin v3 and run the .exe
  7. Ensure ace3 galaxy has been detected on the PC. There will be a yellow column if it is detected.
  8.  If it is detected then check column PDA. Then click on PDA (PDA side which in check) then will be in order to enter fila .md5
  9. Klik START
  10. Wait until the process is complete (PASS) Galaxy ace3 the automatic restart. Finished
This Tutorial : How to Flashing Samsung Via Odin3

 

Blog Archive