How to Flashing Lenovo K900




For Flashing Firmware Update Lenovo K900
  • Tool
  1. Intel Android Driver Here
  2. iSoc usb Driver Here
  3. Manufacturing Flashtool Here
  4. Firmware Lenovo K900 Here
  5. All Stock Rom Lenovo Here
  • Tutorial
  1. Download Intel Android Driver, iSoc USB Driver and Manufacturing Flash Tool must be install first. Make sure installation complete perfectly and don't forget to restart your computer after installation drivers.
  2. Turn on USB Debugging, go to System Setting - Developer Options - USB Debugging
  3. Now connect your device to your computer, Check on your computer Device Manager look for Samsung Android Phone if there is no exclamation mark then your driver installation is successfull
  4. Step 3 is to make sure that Intel Android Driver is installed perfectly, now we gone make sure that iSoc USB Driver is installed perfectly. When your Lenovo K900 still in On condition press and hold Power Button 11 seconds until Lenovo K900 completely turn off then release it. Disconnect it from computer for 10 seconds and connect it again.
  5. Now your computer should found a new hardware and begin the driver installation process, check on Device Manager again and see for Intel Soc if there is no exclamation mark then your driver installation is successfull
  6. The preparation is finish now it time for flashing process. Now run Manufacturing Flash Tool, Click on File - Settings change the value of SOC Devices PID from E004 to 09EE. Look on Options and give tick on Override click on Apply then OK
  7. Now click on File ↦ Open navigate to K900_ROW_1_S_2_009_0131_130727_EasternEurope extracted folder and select flash-DVT3-CPU-sign.xml
  8. When you select it Status Message on Manufacturing Flash Tool will show Ready to Flash ! that mean all file already set up and ready to begin flashing process. Turn off your device, press Power Button for 11 seconds to turn off then connect it your computer immediately, the flashing process will start without your notice. On your device screen will show white USB logo that means flashing process through USB cable.
  9. After finish, disconnect your device. Lenovo K900 will turn on automatically and will boot normally, the first time booting will take some time just wait and patience. Congratulations you already successful install ROM to your Lenovo K900 using Manufacturing Flash Tool Method.
  • Good Lucky

How to Flashing Asus Zenfone 2



How to Flashing Asus Zenfone 2 via adb, Zenfone 2 have 802.11ac Wi-Fi technology, Wi-Fi Direct, Bluetooth 4.0, and NFC. Its MicroUSB port also supports USB-OTG so you can connect this phone with flashisk or other devices that support it. As for business GPS, Asus Zenfone 2 is also supported by advanced technologies such as A-GPS and Glonass to improve the speed and accuracy of GPS
for flashing Asus Zenfone 2 because something wrong. error or brick. this of preparation below
  • Tool before Update
  1.  Usb driver Here
  2. Adb Fastboot Here
  3. Asus Zenfone 2 firmware ( ZE551ML  ) ( ZE550ML ) ( ZE500CL )
  • Tutorial
  1. Turn off your Zenfone 2
  2. Go to Recovery mode with press and hold Power + volume up a few seconds until show fastboot mode
  3. Select Apply Update from ADB
  4. Open CMD command prompt in windows (same folder adb where is located)
  5. Check connection by type adb devices
  6. If connection successfull will be a list of Zenfone 2 devices
  7. type adb sideload file.zip (file.zip=adjust file name, Asus Zenfone 2 what you download earlier)
  8. Wait until the process complete
  9. Zenfone 2 will flash to clean update

How to Flashing Samsung Galaxy S6 EDGE SM-G925I


How to Flashing / reinstall Samsung Galaxy S6 EDGE SM-G925I for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy S6 EDGE SM-G925I by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy S6 EDGE SM-G925I Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy S6 EDGE SM-G925I with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so G925IXXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 
 This Tutorial : How to Flashing Samsung Via Odin3
  • GOOD LUCKY

How to Flashing Samsung Galaxy S3 4G GT-I9305N

How to Flashing / reinstall Samsung Galaxy S3 4G GT-I9305N for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy S3 4G GT-I9305N by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy S3 4G GT-I9305N Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy S3 4G GT-I9305N with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so I9305NXXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 
 This Tutorial : How to Flashing Samsung Via Odin3
 
  • GOOD LUCKY

How to Flashing Samsung Galaxy S5 Exynos Octa SM-G900H


How to Flashing / reinstall Samsung Galaxy S5 Exynos Octa SM-G900H for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy S5 Exynos Octa SM-G900H by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy S5 Exynos Octa SM-G900H Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy S5 Exynos Octa SM-G900H with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so G900HXXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Tutorial : How to Flashing Samsung Via Odin3
 

How to Flashing Samsung Galaxy S5 4G SM-G9008W

How to Flashing / reinstall Samsung Galaxy S5 4G SM-G9008W for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy S5 4G SM-G9008W by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy S5 4G SM-G9008W Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy S5 4G SM-G9008W with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so G9008WXXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Tutorial : How to Flashing Samsung Via Odin3
 
  • GOOD LUCKY

How to Flashing Samsung Galaxy S6 EDGE SM-G9250






How to Flashing / reinstall Samsung Galaxy S6 EDGE SM-G9250 for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy S6 EDGE SM-G9250 by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy S6 EDGE SM-G9250 Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy S6 EDGE SM-G9250 with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so G9250XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Tutorial : How to Flashing Samsung Via Odin3
 
  • GOOD LUCKY

How to Flashing Samsung Galaxy S DUOS 2 GT-S7582





How to Flashing / reinstall Samsung Galaxy S DUOS 2 GT-S7582 for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy S DUOS 2 GT-S7582 by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy S DUOS 2 GT-S7582 Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy S DUOS 2 GT-S7582 with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so S7582XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Tutorial : How to Flashing Samsung Via Odin3
 
  • GOOD LUCKY

How to Flashing Samsung Galaxy Note Edge SM-N9150


How to Flashing / reinstall Samsung Galaxy Note Edge SM-N9150 for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy Note Edge SM-N9150 by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy Note Edge SM-N9150 Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Note Edge SM-N9150 with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so N9150XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Tutorial : How to Flashing Samsung Via Odin3
 
  • GOOD LUCKY

How to Flashing Samsung Galaxy Note LTE GT-N7005


How to Flashing / reinstall Samsung Galaxy Note LTE GT-N7005 for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy Note LTE GT-N7005 by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy Note LTE GT-N7005 Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Note LTE GT-N7005 with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so N7005XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Tutorial : How to Flashing Samsung Via Odin3
 
  • GOOD LUCKY

How to Flashing Samsung Galaxy Note 4 4G Plus SM-N910G Lolipop

How to Flashing / reinstall Samsung Galaxy Note 4 4G Plus SM-N910G for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy Note 4 4G Plus SM-N910G by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy Note 4 4G Plus SM-N910G Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Note 4 4G Plus SM-N910G with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so N910GXXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Tutorial : How to Flashing Samsung Via Odin3
 
  • GOOD LUCKY

Blog Archive