Tutorial Flashing Asus 4S T00Q Via CMD

Tutorial Flashing Asus Zenfone 4S T00Q Via Adb cmd windows. because rooting error, the internal memory is full, to result in a boot loop. worse can be up Hard brick total dead . but as long as they can enter into Droidboot by pressing (Power + Volume up) can still be done flashing the firmware upgrade. As for how to flashing zenfone 4s via ADB can follow the instructions below
  • Tool Before Flash:
  1. Download ADB fastboot here 
  2. Download Intel USB Driver here 
  3. Download System.img.gz here  (832 MB)
  4. Download Boot.img : here
Tutorial Flash Asus 4S T00Q:
  1. Download and Install Intel USB Driver
  2. Download and Ekstrack ADB fastboot
  3. System.img.gz (don't extrack) with Boot.img to folder ADB
  4. Turn Off Zenfone 4S ( 4S )  go to Droidboot with (Power Volume + up)
  5. Connecting zenfone 4s On your Computer
  6. In Folder ADB, select" Open Commond Windows Here "
  7. On CMD write :
typing on CMD

fastboot erase cache

(enter)

fastboot erase userdata

(enter)

fastboot erase system

(enter)

fastboot reboot-bootloader

(enter) wait Droid boot vision show up again,  next

fastboot flash system system.img.gz

(enter)
wait a moment

fastboot flash boot boot.img
(enter)
after Complete,

Fastboot reboot-bootloader

(enter)

last:

fastboot reboot

(Enter) flashing Finish
  • Zenfone 4s will restart with new firmware. Good Lucky
 

Tutorial Flash samsung Galaxy Alpha SM-G850

Tutorial Flash / reinstall Samsung Galaxy Alpha SM-G850 for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. possible you can also do a RESET Alpha SM-G850 by pressing three key combination. when the position device off press and hold the "Vol Up + Home + Power" until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool:
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Alpha SM-G850 Here
  • Tutorial:
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Alpha SM-G850 with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so G850XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Tutorial : How to Flashing Samsung Via Odin3