How to Flashing Update Panasonic T41

Tutorial Flashing Stock Rom Panasonic T41 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Panasonic T41 here

Tutorial Upgrade:

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Update Panasonic T21

On this page we shared Tutorial Flashing Panasonic T21 software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Panasonic T21
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Panasonic T21 from here

  • Tutorial
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How to Flashing Update Panasonic P61

On this page we shared Tutorial Flashing Panasonic P61 software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Panasonic P61
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Panasonic P61 from here

  • Tutorial
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.




How To Flashing Panasonic P41 HD




Tutorial Flashing Stock Rom Panasonic P41 HD using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Panasonic P41 HD here

Tutorial Upgrade:

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Panasonic Eluga S Mini


Tutorial Flashing Stock Rom Panasonic Eluga S Mini using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Panasonic Eluga S Mini here

Tutorial Upgrade:

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Panasonic Eluga S




Tutorial Flashing Stock Rom Panasonic Eluga S using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Panasonic Eluga S here

Tutorial Upgrade:

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Update Panasonic T40

On this page we shared Tutorial Flashing Panasonic T40 software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Panasonic T40
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Panasonic T40 from here

  • Tutorial
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Update Panasonic T9

Tutorial Flashing Stock Rom Panasonic T9 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Panasonic T9 here

Tutorial Upgrade:

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

Complate Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Update Panasonic P81

Tutorial Flashing Stock Rom Panasonic P81 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Panasonic P81 here

Tutorial Upgrade:

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Update Panasonic P55 Novo

On this page we shared Tutorial Flashing Panasonic P55 Novo software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Panasonic P55 Novo
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Panasonic P55 Novo from here

  • Tutorial
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Update Panasonic P41

Tutorial Flashing Stock Rom Panasonic P41 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Panasonic P41 here

Tutorial Upgrade:

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Android Via SP Flashtool

Tutorial Flashing Panasonic Eluga L


Tutorial Flashing Stock Rom Panasonic Eluga L using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Panasonic Eluga L here

Tutorial Upgrade:

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Firmware Panasonic Eluga I

Tutorial Flashing Stock Rom Panasonic Eluga 1 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Panasonic Uluga 1 here

Tutorial Upgrade:

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Android Via SP Flashtool

Tutorial Flash Update Sony Xperia LT26i


Tutorial Flashing Update Sony Xperia LT26i For download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. Below you can find the latest firmware for phonesImmediately following his ways:


· How to Flash latest to Sony Xperia LT26i Firmware


a) First of all, check your firmware version (if you already have the latest, you do not need this tutorial)

b) Download and install the latest Flashtool

c) Download the latest Firmware Xperia LT26i Here all sony firmware here

d) Paste FTF file downloaded in step c) to the folder "Firmware" in the folder Flashtool

e) Open Flashtool, click on the flash and select the firmware was downloaded, click ok. Important - if you do not want to delete the data from your phone, simply uncheck userdata.sin. All data will remain in your phone, but sometimes it can cause additional problems. So it is better (and I recommend) to perform a backup of your personal data, continue with the installation clean and then restore your personal data.

f) Turn off your phone and when Flashtool show pop-up window, connect the phone to the PC by pressing the volume down key until the Led green color appears

g) After a few minutes all done and you get new firmware phone


This is Full Tutorial :  How To Flashing Sony Xperia Via Flashtool

How To Flashing Sony Xperia E Dual C1605

Tutorial Flashing Update Sony Xperia E Dual C1605 For download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. Below you can find the latest firmware for phonesImmediately following his ways:


· How to Flash latest to Sony Xperia E Dual C1605 Firmware


a) First of all, check your firmware version (if you already have the latest, you do not need this tutorial)

b) Download and install the latest Flashtool

c) Download the latest Firmware Xperia E Dual C1605 Here all sony firmware here

d) Paste FTF file downloaded in step c) to the folder "Firmware" in the folder Flashtool

e) Open Flashtool, click on the flash and select the firmware was downloaded, click ok. Important - if you do not want to delete the data from your phone, simply uncheck userdata.sin. All data will remain in your phone, but sometimes it can cause additional problems. So it is better (and I recommend) to perform a backup of your personal data, continue with the installation clean and then restore your personal data.

f) Turn off your phone and when Flashtool show pop-up window, connect the phone to the PC by pressing the volume down key until the Led green color appears

g) After a few minutes all done and you get new firmware phone


This is Full Tutorial :  How To Flashing Sony Xperia Via Flashtool

Tutorial Flashing Sony Xperia ZR LTE C5503

Tutorial Flashing Update Sony Xperia ZR LTE C5503 For download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. Below you can find the latest firmware for phonesImmediately following his ways:


· How to Flash latest to Sony Xperia ZR LTE C5503 Firmware


a) First of all, check your firmware version (if you already have the latest, you do not need this tutorial)

b) Download and install the latest Flashtool

c) Download the latest Firmware Xperia ZR LTE C5503 Here all sony firmware here

d) Paste FTF file downloaded in step c) to the folder "Firmware" in the folder Flashtool

e) Open Flashtool, click on the flash and select the firmware was downloaded, click ok. Important - if you do not want to delete the data from your phone, simply uncheck userdata.sin. All data will remain in your phone, but sometimes it can cause additional problems. So it is better (and I recommend) to perform a backup of your personal data, continue with the installation clean and then restore your personal data.

f) Turn off your phone and when Flashtool show pop-up window, connect the phone to the PC by pressing the volume down key until the Led green color appears

g) After a few minutes all done and you get new firmware phone


This is Full Tutorial :  How To Flashing Sony Xperia Via Flashtool

How To Flashing Sony Xperia E D2202

Tutorial Flashing Update Sony Xperia E D2202 For download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. Below you can find the latest firmware for phonesImmediately following his ways:


· How to Flash latest to Sony Xperia E D2202 Firmware


a) First of all, check your firmware version (if you already have the latest, you do not need this tutorial)

b) Download and install the latest Flashtool

c) Download the latest Firmware Xperia E D2202 Here all sony firmware here

d) Paste FTF file downloaded in step c) to the folder "Firmware" in the folder Flashtool

e) Open Flashtool, click on the flash and select the firmware was downloaded, click ok. Important - if you do not want to delete the data from your phone, simply uncheck userdata.sin. All data will remain in your phone, but sometimes it can cause additional problems. So it is better (and I recommend) to perform a backup of your personal data, continue with the installation clean and then restore your personal data.

f) Turn off your phone and when Flashtool show pop-up window, connect the phone to the PC by pressing the volume down key until the Led green color appears

g) After a few minutes all done and you get new firmware phone


This is Full Tutorial :  How To Flashing Sony Xperia Via Flashtool

Tutorial Update Sony Xperia Go ST27i

http://4.bp.blogspot.com/-E4rZ16Rbd4I/VZL4ul-Lf9I/AAAAAAAAAtA/30bQGU8AvTQ/s1600/xperia%2Bgo.jpg

Tutorial Flashing Update Sony Xperia Go St27i For download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. Below you can find the latest firmware for phonesImmediately following his ways:



  • How to Flash latest to Sony Xperia Tipo St21i Firmware


a) First of all, check your firmware version (if you already have the latest, you do not need this tutorial)

b) Download and install the latest Flashtool

c) Download the latest Firmware Xperia Go St27i Here all sony firmware here

d) Paste FTF file downloaded in step c) to the folder "Firmware" in the folder Flashtool

e) Open Flashtool, click on the flash and select the firmware was downloaded, click ok. Important - if you do not want to delete the data from your phone, simply uncheck userdata.sin. All data will remain in your phone, but sometimes it can cause additional problems. So it is better (and I recommend) to perform a backup of your personal data, continue with the installation clean and then restore your personal data.

f) Turn off your phone and when Flashtool show pop-up window, connect the phone to the PC by pressing the volume down key until the Led green color appears

g) After a few minutes all done and you get new firmware phone


This is Full Tutorial :  How To Flashing Sony Xperia Via Flashtool



Tutorial Flashing Sony Xperia Mini ST15i

http://4.bp.blogspot.com/-WArGoUOg-Cs/VZrdACaundI/AAAAAAAAA1Y/4b9Bx2ZWU0Y/s1600/Flashing%2Bst15i.jpg

How To Flashing Update Sony Xperia Mini ST15i For download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. Below you can find the latest firmware for phonesImmediately following his ways:


    How to Flash latest to Sony Xperia Mini ST15i Firmware


a) First of all, check your firmware version (if you already have the latest, you do not need this tutorial)

b) Download and install the latest Flashtool

c) Download the latest Firmware Xperia Mini ST15i Here all sony firmware here

d) Paste FTF file downloaded in step c) to the folder "Firmware" in the folder Flashtool

e) Open Flashtool, click on the flash and select the firmware was downloaded, click ok. Important - if you do not want to delete the data from your phone, simply uncheck userdata.sin. All data will remain in your phone, but sometimes it can cause additional problems. So it is better (and I recommend) to perform a backup of your personal data, continue with the installation clean and then restore your personal data.

f) Turn off your phone and when Flashtool show pop-up window, connect the phone to the PC by pressing the volume down key until the Led green color appears

g) After a few minutes all done and you get new firmware phone


This is Full Tutorial :  How To Flashing Sony Xperia Via Flashtool



Tutorial Flashing Sony Xperia P LT22

 http://2.bp.blogspot.com/-Rq417kcao30/VZriTovrHZI/AAAAAAAAA1w/KBzL-sVlB7o/s1600/flashing%2Bxperia%2BP%2Blt22.jpg

Tutorial Flashing Update Sony Xperia P LT22 For download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. Below you can find the latest firmware for phonesImmediately following his ways:



  • How to Flash latest to Sony Xperia P LT22 Firmware


a) First of all, check your firmware version (if you already have the latest, you do not need this tutorial)

b) Download and install the latest Flashtool

c) Download the latest Firmware Xperia P LT22 Here all sony firmware here

d) Paste FTF file downloaded in step c) to the folder "Firmware" in the folder Flashtool

e) Open Flashtool, click on the flash and select the firmware was downloaded, click ok. Important - if you do not want to delete the data from your phone, simply uncheck userdata.sin. All data will remain in your phone, but sometimes it can cause additional problems. So it is better (and I recommend) to perform a backup of your personal data, continue with the installation clean and then restore your personal data.

f) Turn off your phone and when Flashtool show pop-up window, connect the phone to the PC by pressing the volume down key until the Led green color appears

g) After a few minutes all done and you get new firmware phone


This is Full Tutorial :  How To Flashing Sony Xperia Via Flashtool



Blog Archive