Tutorial Flashing Samsung Galaxy Grand I9080L


Tutorial Flash / reinstall Samsung Galaxy Grand I9080L for download errorsapplication errorsthe touchscreen is not sensitiveexposed to the virus internal memoryloading a boot loopuntil the hardbrick could be detected in a firmware update for the computer driverspossible you can also do a RESET  by pressing three key combinationwhen the position device off press and hold the "Vol Up + Home + Power" until the picture android robotthen do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool :
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy Grand I9080L Here
  • Tutorial Flashing :
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Grand with win rar to find .md5 file
  3. Turn off your galaxypress and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column IDCOM colored blue
  7. If the IDCOM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so I9080LXXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Complate Tutorial : How to Flashing Samsung Via Odin3

Tutorial Flash Samsung Galaxy XCover 3


Tutorial Flash / reinstall Samsung Galaxy XCover 3 SM-G388F for download errorsapplication errorsthe touchscreen is not sensitiveexposed to the virus internal memoryloading a boot loopuntil the hardbrick could be detected in a firmware update for the computer driverspossible you can also do a RESET  by pressing three key combinationwhen the position device off press and hold the "Vol Up + Home + Power" until the picture android robotthen do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool :
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy XCover 3 Here
  • Tutorial Flashing :
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy XCover 3 with win rar to find .md5 file
  3. Turn off your galaxypress and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column IDCOM colored blue
  7. If the IDCOM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so G388XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Complate Tutorial : How to Flashing Samsung Via Odin3

How To Flashing Update Sony Xperia Z5 E6653


Tutorial Flashing Update Sony Xperia Z5 E6653 For download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. Below you can find the latest firmware for phonesImmediately following his ways:


· How to Flash latest to Sony Xperia Z5 E6653 Firmware


a) First of all, check your firmware version (if you already have the latest, you do not need this tutorial)

b) Download and install the latest Flashtool

c) Download the latest Firmware Xperia Z5 E6653 Here all sony firmware here

d) Paste FTF file downloaded in step c) to the folder "Firmware" in the folder Flashtool

e) Open Flashtool, click on the flash and select the firmware was downloaded, click ok. Important - if you do not want to delete the data from your phone, simply uncheck userdata.sin. All data will remain in your phone, but sometimes it can cause additional problems. So it is better (and I recommend) to perform a backup of your personal data, continue with the installation clean and then restore your personal data.

f) Turn off your phone and when Flashtool show pop-up window, connect the phone to the PC by pressing the volume down key until the Led green color appears

g) After a few minutes all done and you get new firmware phone


This is Full Tutorial :  How To Flashing Sony Xperia Via Flashtool

Tutorial Flashing Sony Xperia M4 Aqua E2302


Tutorial Flashing Update Sony Xperia M4 Aqua E2302 For download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. Below you can find the latest firmware for phonesImmediately following his ways:



· How to Flash latest to Sony Xperia M4 Aqua E2302 Firmware


a) First of all, check your firmware version (if you already have the latest, you do not need this tutorial)

b) Download and install the latest Flashtool

c) Download the latest Firmware Xperia M4 Aqua E2302 Here all sony firmware here

d) Paste FTF file downloaded in step c) to the folder "Firmware" in the folder Flashtool

e) Open Flashtool, click on the flash and select the firmware was downloaded, click ok. Important - if you do not want to delete the data from your phone, simply uncheck userdata.sin. All data will remain in your phone, but sometimes it can cause additional problems. So it is better (and I recommend) to perform a backup of your personal data, continue with the installation clean and then restore your personal data.

f) Turn off your phone and when Flashtool show pop-up window, connect the phone to the PC by pressing the volume down key until the Led green color appears

g) After a few minutes all done and you get new firmware phone


This is Full Tutorial :  How To Flashing Sony Xperia Via Flashtool

How To Flashing Sony Xperia Z3+ E6553



Tutorial Flashing Update Sony Xperia Z3+ E6553 For download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. Below you can find the latest firmware for phonesImmediately following his ways:


· 


How to Flash latest to Sony Xperia Z3+ E6553 Firmware


a) First of all, check your firmware version (if you already have the latest, you do not need this tutorial)

b) Download and install the latest Flashtool

c) Download the latest Firmware Xperia Z3+ E6553 Here all sony firmware here

d) Paste FTF file downloaded in step c) to the folder "Firmware" in the folder Flashtool

e) Open Flashtool, click on the flash and select the firmware was downloaded, click ok. Important - if you do not want to delete the data from your phone, simply uncheck userdata.sin. All data will remain in your phone, but sometimes it can cause additional problems. So it is better (and I recommend) to perform a backup of your personal data, continue with the installation clean and then restore your personal data.

f) Turn off your phone and when Flashtool show pop-up window, connect the phone to the PC by pressing the volume down key until the Led green color appears

g) After a few minutes all done and you get new firmware phone


This is Full Tutorial :  How To Flashing Sony Xperia Via Flashtool

How To Flash Update Sony Xperia C4 E5333


Tutorial Flashing Update Sony Xperia C4 E5333 For download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. Below you can find the latest firmware for phonesImmediately following his ways:


· How to Flash latest to Sony Xperia C4 E5333 Firmware


a) First of all, check your firmware version (if you already have the latest, you do not need this tutorial)

b) Download and install the latest Flashtool

c) Download the latest Firmware Xperia C4 E5333 Here all sony firmware here

d) Paste FTF file downloaded in step c) to the folder "Firmware" in the folder Flashtool

e) Open Flashtool, click on the flash and select the firmware was downloaded, click ok. Important - if you do not want to delete the data from your phone, simply uncheck userdata.sin. All data will remain in your phone, but sometimes it can cause additional problems. So it is better (and I recommend) to perform a backup of your personal data, continue with the installation clean and then restore your personal data.

f) Turn off your phone and when Flashtool show pop-up window, connect the phone to the PC by pressing the volume down key until the Led green color appears

g) After a few minutes all done and you get new firmware phone


This is Full Tutorial :  How To Flashing Sony Xperia Via Flashtool

How To Flashing Oppo R809T Via SPFT


On this page we shared Tutorial Flashing Oppo R809T software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Oppo R809T
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Oppo R809T from here

  • Tutorial
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flash Update lenovo Vibe X2 CU


Tutorial Flashing Stock Rom lenovo Vibe X2 CU using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom lenovo Vibe X2 CU here

Tutorial Upgrade:

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.




How To Flashing Lenovo S5000 Via SPFT


On this page we shared Tutorial Flashing Lenovo S5000 software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Lenovo S5000
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Lenovo S5000 from here

  • Tutorial
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Lenovo A2010 Via SP Flashtool


Tutorial Flashing Stock Rom Lenovo A2010 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Lenovo A2010 here

Tutorial Upgrade:

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.




How To Flashing Lenovo K3 Note Via Flashtool


On this page we shared Tutorial Flashing Lenovo K3 Note software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.

  • The following tools Lenovo K3 Note
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Lenovo K3 Note from here

  • Tutorial
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flash Update Lenovo S850 Via SPFT


On this page we shared Tutorial Flashing Lenovo S850 software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Lenovo S850
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Lenovo S850 from here

  • Tutorial
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How to Flashing Update Hitech Amaze S430


Tutorial Flashing Stock Rom Hitech Amaze S430 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Hitech Amaze S430 here

Tutorial Upgrade:

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Eurostar Epad Genie ET-7183G


On this page we shared Tutorial Flashing Eurostar Epad Genie ET-7183G software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.

  • The following tools Eurostar Epad Genie ET-7183G
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Eurostar Epad Genie ET-7183G from here

  • Tutorial
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.