How to Flash Hitech Air A2 MT6572

Tutorial Flashing Stock Rom Hitech Air A2 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Hitech Air A2 :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Hitech Air A2 here

Tutorial Upgrade:

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Android Via SP Flashtool

How To Flash Hitech Air A1 Via SP Flashtool



Tutorial Flashing Stock Rom Hitech Air A1 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Hitech Air A1 here

Tutorial Upgrade:

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Samsung Galaxy E7 E700F

Tutorial Flash / reinstall Firmware Samsung Samsung Galaxy E7 E700F for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. possible you can also do a RESET Samsung Galaxy E7 E700F by pressing three key combination. when the position device off press and hold the "Vol Up + Home + Power" until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool :
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Samsung Galaxy E7 E700F Here
  • Tutorial Flashing :
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Samsung Galaxy E7 E700F with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so E700FXXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Complate Tutorial : How to Flashing Samsung Via Odin3

How To Flash Samsung Galaxy Trend Plus GT-S7580

Tutorial Flash / reinstall Firmware Samsung Galaxy Trend Plus GT-S7580 for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. possible you can also do a RESET Galaxy Trend Plus GT-S7580 by pressing three key combination. when the position device off press and hold the "Vol Up + Home + Power" until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool :
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy Trend Plus GT-S7580 Here
  • Tutorial Flashing :
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Trend Plus GT-S7580 with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so S7580XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Complate Tutorial : How to Flashing Samsung Via Odin3

Hot To Flash Samsung Galaxy A8 SM-A800F

How to Flashing / Reinstall Samsung Galaxy A8 SM-A800F for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy A8 SM-A800F by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool :
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy A8 SM-A800F Here
  • Tutorial Flashing :
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy A8 SM-A800F with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so I9230XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Complate Tutorial : How to Flashing Samsung Via Odin3

How To Flash Samsung Galaxy Folder GT-I9230

How to Flashing / reinstall Samsung Galaxy Folder GT-I9230 for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy Folder GT-I9230 by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool :
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy Folder GT-I9230 Here
  • Tutorial Flashing :
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Folder GT-I9230 with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so I9230XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Complate Tutorial : How to Flashing Samsung Via Odin3

How to Flash Samsung Galaxy Prime SM-G531

How to Flashing / reinstall Samsung Galaxy Prime SM-G531F for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy Prime SM-G531F by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool :
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy Prime SM-G531F Here
  • Tutorial Flashing :
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Prime SM-G531F with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so G531XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Complate Tutorial : How to Flashing Samsung Via Odin3

How To Flash Samsung Galaxy Beam GT-I8530

Tutorial Flash / reinstall Samsung Galaxy Beam GT-I8530 for download errorsapplication errorsthe touchscreen is not sensitiveexposed to the virus internal memoryloading a boot loopuntil the hardbrick could be detected in a firmware update for the computer driverspossible you can also do a RESET  by pressing three key combinationwhen the position device off press and hold the "Vol Up + Home + Power" until the picture android robotthen do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool :
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy Beam GT-I8530 Here
 
  • Tutorial Flashing Samsung Galaxy Beam GT-I8530:
 
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Grand with win rar to find .md5 file
  3. Turn off your galaxypress and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column IDCOM colored blue
  7. If the IDCOM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so I8530XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Complate Tutorial : How to Flashing Samsung Via Odin3