How To Flash Hitech Amaze Tab 3 Via SPFT



Tutorial Flashing Stock Rom Hitech Amaze Tab 3 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Hitech Amaze Tab 3 :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Hitech Amaze Tab 3 here

Tutorial Upgrade:

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Hitech Amaze Tab 3 Tutorial : How to Flashing Android Via SP Flashtool

How To Flash Update hitech Air A6 Via SPFT



Tutorial Flashing Stock Rom hitech Air A6 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom hitech Air A6 here

Tutorial Upgrade:

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate hitech Air A6 Tutorial : How to Flashing Android Via SP Flashtool

Tutorial Flash Update Sony Xperia M4 Aqua E2303


How To Flashing Update Firmware Sony Xperia M4 Aqua E2303 android Lolipop for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. Below you can find the latest firmware for phonesImmediately following his ways:



· How to Flash latest to Sony Xperia M4 Aqua E2303 Firmware


a) First of all, check your firmware version (if you already have the latest, you do not need this tutorial)

b) Download and install the latest Flashtool

c) Download the latest Firmware Xperia M4 Aqua E2303 Here all sony firmware here

d) Paste FTF file downloaded in step c) to the folder "Firmware" in the folder Flashtool

e) Open Flashtool, click on the flash and select the firmware was downloaded, click ok. Important - if you do not want to delete the data from your phone, simply uncheck userdata.sin. All data will remain in your phone, but sometimes it can cause additional problems. So it is better (and I recommend) to perform a backup of your personal data, continue with the installation clean and then restore your personal data.

f) Turn off your phone and when Flashtool show pop-up window, connect the phone to the PC by pressing the volume down key until the Led green color appears

g) After a few minutes all done and you get new firmware phone


This is Full Tutorial :  How To Flashing Sony Xperia Via Flashtool

How To Flash Update Sony Xperia M5 E5603

Tutorial Flashing Update Firmware Sony Xperia M5 E5603 For download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. Below you can find the latest firmware for phonesImmediately following his ways:



  • How to Flash latest to Sony Xperia M5 E5603 Firmware


a) First of all, check your firmware version (if you already have the latest, you do not need this tutorial)

b) Download and install the latest Flashtool

c) Download the latest Firmware Sony Xperia M5 E5603 Here all sony firmware here

d) Paste FTF file downloaded in step c) to the folder "Firmware" in the folder Flashtool

e) Open Flashtool, click on the flash and select the firmware was downloaded, click ok. Important - if you do not want to delete the data from your phone, simply uncheck userdata.sin. All data will remain in your phone, but sometimes it can cause additional problems. So it is better (and I recommend) to perform a backup of your personal data, continue with the installation clean and then restore your personal data.

f) Turn off your phone and when Flashtool show pop-up window, connect the phone to the PC by pressing the volume down key until the Led green color appears

g) After a few minutes all done and you get new firmware phone


This is Full Tutorial :  How To Flashing Sony Xperia Via Flashtool


How To Update Huawei T8830 Pro Via SPFT

On this page we shared Tutorial Flashing Update Huawei T8830 Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Huawei T8830
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Huawei T8830 from here

  • Tutorial Update Huawei T8830
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Update Huawei T8951 Via SPFT

On this page we shared Tutorial Flashing Update Huawei T8951 Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Huawei T8951
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Huawei T8951 from here

  • Tutorial Update Huawei T8951
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flash Huawei Ascend G700 Via SPFT

On this page we shared Tutorial Flashing Update Huawei Ascend G700 Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Huawei Ascend G700
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Huawei Ascend G700 from here

  • Tutorial Update Huawei Ascend G700
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flash Update Huawei Honor 3X (G750-T00)

On this page we shared Tutorial Flashing Update Huawei Honor 3X (G750-T00). cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


Tool Update :

Download Link: Click here to download firmware 4.8.16 KitKat firmware for your Huawei Honor 3X (G750-T00).


How to Install Huawei Honor 3X (G750-T00)

  1. Download the firmware package on your PC using the aforementioned link. 
  2. Connect your Honor 3X to the PC using a USB cable in mass storage mode.
  3. Create a new folder name “dload” in the microSD card.
  4. Copy the firmware package you downloaded earlier to dload.
  5. Disconnect the USB cable and turn off your phone (make sure it vibrates before you proceed to the next step).
  6. Reboot into Recovery Mode by holding Volume Down + Volume Up + Power button for 5-6 seconds.
  7. Your phone will automatically search for the update package and flash it. Wait for a few minutes until it gets completed.
  8. Reboot the device and experience the new OS!

This firmware already contains Gapps (Google apps) so you don’t have to worry about flashing them again.

How To Flash Huawei Ascend Y511 Via SPFT


On this page we shared Tutorial Flashing Update Huawei Ascend Y511 Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Huawei Ascend Y511
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Huawei Ascend Y511 from here

  • Tutorial Update Huawei Ascend Y511
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flash Update BLU Studio X


On this page we shared Tutorial Flashing BLU Studio X Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools BLU Studio X
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Login www.needrom.com and download link below
  6. Stock Rom BLU Studio X from here

  • Tutorial Flashing BLU Studio X
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Update Blu Vivo Air D980L Via SPFT

On this page we shared Tutorial Flashing Blu Vivo Air D980L Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Blu Vivo Air D980L
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Login www.needrom.com and download link below
  6. Stock Rom Blu Vivo Air D980L from here

  • Tutorial Flashing Blu Vivo Air D980L
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing BLU Studio G Via SPFT

On this page we shared Tutorial Flashing BLU Studio G D790 Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools BLU Studio G
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Login www.needrom.com and download link below
  6. Stock Rom BLU Studio G from here

  • Tutorial Flashing BLU Studio G
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flash BLU Energy X Plus E030U

On this page we shared Tutorial Flashing BLU Energy X Plus E030U Android Lolipop Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools BLU Energy X Plus E030U
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Login www.needrom.com and download link below
  6. Stock Rom BLU Energy X Plus E030U from here

  • Tutorial Flashing BLU Energy X Plus E030U
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing BLU Studio 5.0 Ce D536


On this page we shared Tutorial Flashing BLU Studio 5.0 Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools BLU Blu Studio 5.0
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Login www.needrom.com and download link below
  6. Stock Rom BLU Studio 5.0 MT6571 from here

  • Tutorial Flashing Blu Studio 5.0
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flash BLU Advance 4.0 A270a Via SPFT


On this page we shared Tutorial Flashing BLU Advance 4.0 A270a Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools BLU Advance 4.0 A270a
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Login www.needrom.com and download link below
  6. Stock Rom BLU Advance 4.0 A270a from here

  • Tutorial Flashing BLU Advance 4.0 A270a
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

Tutorial Flash Acer Liquid Z110 Via SPFT

How to Flash Stock Rom Acer Liquid Z110 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Acer Liquid Z110:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Acer Liquid Z110 here
  6. All Stock Rom Acer Smartphone from here

Tutorial Upgrade Acer Liquid Z110 :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Android Via SP Flashtool

Tutorial Flash Acer Z205 Via SP Flashtool

How to Flash Stock Rom Firmware Acer Z205 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of software. It can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Acer Z205 :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Acer Z205 from here
  6. All Stock Rom Acer Smartphone from here

Tutorial Upgrade Acer Z205 :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Android Acer Z205 Via SP Flashtool

Tutorial Flash Acer Jade Z S57 Via SPFT

How to Flashing Update Firmware Stock Rom Acer Jade Z S57 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of software. It can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Acer Jade Z S57:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Acer Acer Jade Z S57 here
  6. All Stock Rom Acer Smartphone from here

Tutorial Upgrade:
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Update Acer Liquid Z4 Z160



Tutorial Flashing Update Stock Rom Acer Liquid Z4 Z160 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Acer Liquid Z4 Z160:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Acer Liquid Z4 Z160 here

Tutorial Upgrade Acer Liquid Z4 Z160:

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Blog Archive