How To Flashing Update BLU Vivo XL Via SP Flashtool


Tutorial Flashing Update Firmware BLU Vivo XL Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools BLU Vivo XL
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom BLU Vivo XL from here

  • Tutorial Flashing BLU Vivo XL
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Huawei Y618 Via SP Flashtool


On this page we shared Tutorial Flashing Update Huawei Y618 Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Huawei Y618
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Huawei Y618 from here

  • Tutorial Update Huawei Y618
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Huawei Honor Holly U19 Via SP Flashtool


On this page we shared Tutorial Flashing Update Huawei Honor Holly U19 Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Huawei Honor Holly U19
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Huawei Honor Holly U19 from here

  • Tutorial Update Huawei Honor Holly U19
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.    
     
 

How To Flashing Huawei Ascend Y520 Via SP Flashtool

On this page we shared Tutorial Flashing Update Huawei Ascend Y520-U22 Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Huawei Ascend Y520-U22
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Huawei Ascend Y520-U22 from here

  • Tutorial Update Huawei Ascend Y520
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Update Huawei Y360 Via SP Flashtool


On this page we shared Tutorial Flashing Update Huawei Y360 Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Huawei Y360-U61
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Huawei Y360-U61 from here

  • Tutorial Update Huawei Y360
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.   
 

How To Flashing Samsung Galaxy S4 Active GT-I9295


Tutorial Flash / reinstall Samsung Galaxy S4 Active GT-I9295 for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. possible you can also do a RESET Galaxy S4 Active GT-I9295 by pressing three key combination. when the position device off press and hold the "Vol Up + Home + Power" until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool :
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy S4 Active GT-I9295 Here
  • Tutorial Flashing :
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy S4 Active GT-I9295 with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so I9295XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Complate Tutorial : How to Flashing Samsung Via Odin3

How To Flashing Samsung Galaxy S4 Mini Duos GT-I9192


Tutorial Flash / reinstall Samsung Galaxy S4 Mini Duos GT-I9192 for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the hardbrick could be detected in a firmware update for the computer drivers. possible you can also do a RESET Galaxy S4 Mini Duos GT-I9192 by pressing three key combination. when the position device off press and hold the "Vol Up + Home + Power" until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool :
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Galaxy S4 Mini Duos GT-I9192 Here
  • Tutorial Flashing :
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy S4 Mini Duos with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so I9192XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Complate Tutorial : How to Flashing Samsung Via Odin3

How To Flashing Galaxy Note 5 Duos N9208 Marshmallow


Tutorial Flash / reinstall Samsung Galaxy Note 5 Duos N9208 for download errorsapplication errorsthe touchscreen is not sensitiveexposed to the virus internal memoryloading a boot loopuntil the hardbrick could be detected in a firmware update for the computer driverspossible you can also do a RESET  by pressing three key combinationwhen the position device off press and hold the "Vol Up + Home + Power" until the picture android robotthen do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool :
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Samsung Galaxy Note 5 Duos N9208 Here
  • Tutorial Flashing :
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Note 5 Duos N9208 with win rar to find .md5 file
  3. Turn off your galaxypress and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column IDCOM colored blue
  7. If the IDCOM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so N9208XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Complate Tutorial : How to Flashing Samsung Galaxy Note 5 Duos N9208 Via Odin3

How To Flashing Samsung Galaxy Ace GT-S5830


Tutorial Flash / reinstall Samsung
Galaxy Ace GT-S5830 for download errorsapplication errorsthe touchscreen is not sensitiveexposed to the virus internal memoryloading a boot loopuntil the hardbrick could be detected in a firmware update for the computer driverspossible you can also do a RESET  by pressing three key combinationwhen the position device off press and hold the "Vol Up + Home + Power" until the picture android robotthen do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool :
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Samsung Galaxy Ace GT-S5830 Here
  • Tutorial Flashing :
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Ace GT-S5830 with win rar to find .md5 file
  3. Turn off your galaxypress and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column IDCOM colored blue
  7. If the IDCOM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so G388XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Complate Tutorial : How to Flashing Samsung Galaxy Ace GT-S5830 Via Odin3

How To Flashing Galaxy Ace 2 GT-I8160 Via Odin



Tutorial Flash / reinstall Samsung Galaxy Ace 2 GT-I8160 for download errorsapplication errorsthe touchscreen is not sensitiveexposed to the virus internal memoryloading a boot loopuntil the hardbrick could be detected in a firmware update for the computer driverspossible you can also do a RESET Samsung Galaxy Ace 2 GT-I8160 by pressing three key combinationwhen the position device off press and hold the "Vol Up + Home + Power" until the picture android robotthen do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update.

  • Tool :
  1. Usb driver Here 
  2. Samsung kies Here
  3. Odin v3 Here
  4. Firmware Samsung Galaxy Ace 2 GT-I8160 Here

  • Tutorial Flashing Galaxy Ace 2 GT-I8160 :
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Samsung Galaxy Ace 2 GT-I8160 with win rar to find .md5 file
  3. Turn off your galaxypress and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column IDCOM colored blue
  7. If the IDCOM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so I8160XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 


This Complate Tutorial : How to Flashing Samsung Galaxy Ace 2 GT-I8160 Via Odin3

How To Flashing Samsung Galaxy Young S6310 Via Odin


Tutorial Flash / reinstall Samsung Galaxy Young S6310 for download errorsapplication errorsthe touchscreen is not sensitiveexposed to the virus internal memoryloading a boot loopuntil the hardbrick could be detected in a firmware update for the computer driverspossible you can also do a RESET Samsung Galaxy Young S6310 by pressing three key combinationwhen the position device off press and hold the "Vol Up + Home + Power" until the picture android robotthen do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update.

  • Tool :
  1. Usb driver Here 
  2. Samsung kies Here
  3. Odin v3 Here
  4. Firmware Samsung Galaxy Young S6310 Here

  • Tutorial Flashing Galaxy Young S6310 :
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Samsung Galaxy Young S6310 with win rar to find .md5 file
  3. Turn off your galaxypress and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column IDCOM colored blue
  7. If the IDCOM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so S6310XXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 


This Complate Tutorial : How to Flashing Samsung Galaxy Young S6310 Via Odin3

How To Flashing Lenovo A706 Via SP Flashtool


Tutorial Flashing Stock Rom Lenovo A706 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Lenovo A706 :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Lenovo A706 here

Tutorial Upgrade Lenovo A706 :

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.




How To Flashing Lenovo A398T / A398T+ Via Flashtool


Tutorial Flashing Stock Rom Lenovo A398T / A398T+ Plus using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Lenovo A398T / A398T+ :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Lenovo A398T here
  6. Stock Rom Lenovo A398T+ Plus here

Tutorial Upgrade Lenovo A388T :

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.




How To Flashing Lenovo A388T Via SP Flashtool


Tutorial Flashing Stock Rom Lenovo A388T using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Lenovo A388T:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Lenovo A388T here

Tutorial Upgrade Lenovo A388T :

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.




Blog Archive