How To Flashing Elephone M3 Via SP Flashtool


Tutorial Flashing Update Firmware Rom Elephone M3 Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Elephone M3 :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Elephone M3 from here

  • Tutorial Update Firmware Elephone M3 :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

How To Flashing Elephone M2 Lollipop Via SP Flashtool


Tutorial Flashing Update Firmware Rom Elephone M2 Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Elephone M2 :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Elephone M2 from here

  • Tutorial Update Firmware Elephone M2 :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

How To Flashing Elephone G9 Via SP Flashtool


Tutorial Flashing Update Firmware Rom Elephone G9 Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Elephone G9 :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Elephone G9 from here

  • Tutorial Update Firmware Elephone G9 :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

How To Flashing Update Elephone G7 Via SP Flashtool




Tutorial Flashing Update Firmware Rom Elephone G7 Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Elephone G7 :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Elephone G7 from here

  • Tutorial Update Firmware Elephone G7 :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

How To Flashing Elephone G6 Via SP Flashtool


Tutorial Flashing Update Firmware Rom Elephone G6 Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Elephone G6 :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Elephone G6 from here

  • Tutorial Update Firmware Elephone G6 :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

How To Flashing Elephone G5 Via SP Flashtool




Tutorial Flashing Update Stock Rom Firmware Elephone G5 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Elephone G5 :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom, Firmware Elephone G5 here

Tutorial Upgrade Elephone G5 :

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Elephone G4 Via SP Flashtool




Tutorial Flashing Stock Rom Firmware Elephone G4 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Elephone G4 :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom, Firmware Elephone G4 here

Tutorial Upgrade Elephone G4 :

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Elephone G4 Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Elephone G2 Lollipop Via SP Flashtool


Tutorial Flashing Stock Rom Firmware Elephone G2 Lolipop using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Elephone G2 Lolipop :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom, Firmware Elephone G2 Lolipop here

Tutorial Upgrade Elephone G2 Lolipop :

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Elephone G2 Lolipop Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Elephone M1 Via SP Flashtool


Tutorial Flashing Stock Rom Elephone M1 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Elephone M1 :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom, Firmware Elephone M1 here

Tutorial Upgrade Elephone M1 :

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Elephone M1 Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Elephone G1 Via SP Flashtool


Tutorial Flashing Stock Rom Elephone G1 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Elephone G1 :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom, Firmware Elephone G1 here

Tutorial Upgrade Elephone G1 :

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Elephone G1 Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Ulefone Be One Via SP Flashtool


Tutorial Flashing Update Ulefone Be One Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Ulefone Be One
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Ulefone Be One from here

  • Tutorial Update Firmware Ulefone Be One
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

How To Flashing Update Ulefone Be Touch Via SP Flashtool

Tutorial Flashing Update Ulefone Be Touch Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Ulefone Be Touch
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Ulefone Be Touch Kitkat from here

  • Tutorial Update Firmware Ulefone Be Touch
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

 

How To Flashing Ulefone Be Pure Via SP Flashtool


Tutorial Flashing Update Ulefone Be Pure Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Ulefone Be Pure
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Ulefone Be Pure from here

  • Tutorial Update Firmware Ulefone Be Pure
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

How To Flashing Ulefone Be Pro Via SP Flashtool


Tutorial Flashing Update Ulefone Be Pro Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Ulefone Be Pro
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Ulefone Be Pro from here

  • Tutorial Update Firmware Ulefone Be Pro
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

 

How To Flashing Ulefone BeTouch 2 Via SP Flashtool


On this page we shared Tutorial Flashing Ulefone BeTouch 2 Lolipop Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Ulefone BeTouch 2 Lolipop
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Ulefone BeTouch 2 Lolipop from here

  • Tutorial Update Firmware Ulefone BeTouch 2 Lolipop
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

 

How To Flashing Update Ulefone Future Marshmallow


Tutorial Flashing Update Ulefone Future Marshmallow Via SP Flashtool, cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Ulefone Paris
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom, Firmware Ulefone Future Marshmallow from here

  • Tutorial Flashing Update Ulefone Future Marshmallow
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Update Ulefone Vienna Via SP Flashtool



Tutorial Flashing Ulefone Vienna Lolipop Via SP Flashtool, cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Ulefone Vienna
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom, Firmware Ulefone Vienna Lolipop from here

  • Tutorial Flashing Update Ulefone Vienna Lolipop
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Ulefone Power Marshmallow Via SPFT




Tutorial Flashing Ulefone Power Marshmallow Via SP Flashtool, cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Ulefone Paris
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom, Firmware Ulefone Power Marshmallow from here

  • Tutorial Flashing Update Ulefone Power Marshmallow
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Rom Ulefone Paris Via SP Flashtool


On this page we shared Tutorial Flashing Ulefone Paris cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Ulefone Paris
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom, Firmware Ulefone Paris from here

  • Tutorial Flashing Update Ulefone Paris
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

Blog Archive