How To Flashing Update Adcom A530 HD Via SP Flashtool


Tutorial Flashing Update Firmware Adcom Thunder A530 HD Via SP Flashtool Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Adcom A530 HD :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Adcom A530 HD from here

  • Tutorial Update Adcom A530 HD :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Update Wiko Selfy 4G Via SP Flashtool


Tutorial Flashing Update Firmware Wiko Selfy 4G Via SP Flashtool Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Wiko Selfy 4G :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Wiko Selfy 4G from here

  • Tutorial Update Wiko Selfy 4G :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Firmware Wiko Rainbow 4G Via SP Flashtool


Tutorial Flashing Update Wiko Rainbow 4G Via SP Flashtool Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Wiko Rainbow 4G :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Wiko Rainbow 4G from here

  • Tutorial Update Wiko Rainbow 4G :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Stock Rom Wiko Jimmy Via SP Flashtool



Tutorial Flashing Update Wiko Jimmy Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Wiko Jimmy :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Wiko Jimmy from here

  • Tutorial Update Wiko Jimmy :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Firmware Wiko Highway Signs Via Flashtool

 
Tutorial Flashing Update Wiko Highway Signs Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Wiko Highway Signs :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Wiko Highway Signs from here

  • Tutorial Update Wiko Highway Signs :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Firmware Wiko Highway Via SP Flashtool


Tutorial Flashing Update Wiko Highway Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Wiko Highway
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Wiko Highway from here

  • Tutorial Update Wiko Highway :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Update Wiko Cink Slim 2 Via SP Flashtool


On this page we shared Tutorial Flashing Update Wiko Cink Slim 2 Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Wiko Cink Slim 2
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Wiko Cink Slim 2 from here

  • Tutorial Update Wiko Cink Slim 2
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Update Wiko Birdy 4G Via SP Flashtool



On this page we shared Tutorial Flashing Update Wiko Birdy 4G Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Wiko Birdy 4G
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Wiko Birdy 4G from here

  • Tutorial Update Wiko Birdy 4G
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Samsung Galaxy Grand Duos I9802 Via Odin


How to Flashing / reinstall Samsung Galaxy Grand Duos I9802 Via Odin for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Samsung Galaxy Grand Duos I9802 by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update.

  • Tool Galaxy Grand Duos I9802 :
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Samsung Galaxy Grand Duos I9802 Here

  • Tutorial Flashing Update Galaxy Grand Duos I9802 :
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Samsung Galaxy Grand Duos I9802 with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so I9802XXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish


This Complate Tutorial : How to Flashing Galaxy Grand Duos I9802 Via Odin3

How To Remove Amazon Ads On BLU R1 HD And Ota Updates


On This Page we have share Tutorial Remove Amazon Ads BLU R1 HD On version BLU_R0010UU_V6.4_GENERIC you can be fixed by updating BLU R1 HD firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the boot menu with recovery update or OTA update and you can remove amazon ads from step below :

For Firmware Blu R1 HD here

Steps For Unlock Bootloader BLU R1
  1. Download SP-Flash-Tool-bootloader-unlock.zip here
  2. Extract the SP-Flash-Tool-bootloader-unlock.zip to your desktop. Note 7zip is great to extract files.
  3. Lauch Flash_tool.exe
  4. Select scatter-loading and browser to load MT6735_Android_scatter_R1_Unlock.txt
  5. Click download button to start.
  6. Now plug your phone into the computer. to boot the device to preloader and start the flash. You can do it two ways: 1. power off the phone and flash will start or 2. From a powered off stat power on the device while plugged into the computer. either way will start the sp flash tool.
  7. Once the flash is complete which should take seconds you can unplug the device and reboot it. Congrats you can now unlock the bootloader like any normal device now.


Steps To Remove Ads amazon on BLU R1 HD :

  1. Download SP-Flash-Tool-Remove-Amazon-Ads-plus-ota-updates.zip Here
  2. Extract the SP-Flash-Tool-Remove-Amazon-Ads-plus-ota-updates.zip to your desktop. Note 7zip is great to extract files.
  3. Lauch Flash_tool.exe
  4. Select scatter-loading and browser to load MT6735_Android_scatter_R1_HD_NO_ADS.txt
  5. Click download button to start.
  6. Now plug your phone into the computer. to boot the device to preloader and start the flash. You can do it two ways: 1. power off the phone and flash will start or 2. From a powered off stat power on the device while plugged into the computer. either way will start the sp flash tool.
  7. Once the flash is complete you can unplug the device and reboot it. Congrats you have removed the ads and ota updates from the Amazon Blu R1 HD. Bounce you have also enabled bootloader unlocking if you want it.

NOTE: ads may still be on the lock screen after this process if so please factory reset the device to remove those ads that are saved in userdata. or if you follow Bootloader unlock Method 1 steps 1-7 your userdata will get wiped in the process

How To Flashing Infinix Race Bolt X450 Via SP Flashtool


On this page we shared Tutorial Flashing Update Stock Rom Infinix Race Bolt X450. cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Infinix Race Bolt X450
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Infinix Race Bolt X450 from here

  • Tutorial Update Firmware Infinix Race Bolt X450
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Infinix Joypad 8 X800 / 8S X801 Via SP Flashtool




Tutorial Flashing Update Infinix Joypad 8 X800 / Infinix 8S X801 Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Joypad 8 X800 / 8S X801
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Infinix Joypad 8 X800 from here
  6. Stock Rom Infinix Joypad 8S X801 from here

  • Tutorial Update Firmware Infinix Joypad 8 X800 / 8S X801
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Infinix Joypad 10 X1000 Via SP Flashtool


Tutorial Flashing Update Infinix Joypad 10 X1000 Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Infinix Joypad 10 X1000
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Infinix Joypad 10 X1000 from here

  • Tutorial Update Firmware Infinix Joypad 10 X1000
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Oppo N1 Mini Via Recovery Mode




Tutorial Flashing Update Stock Rom Firmware Oppo N1 Mini Via Recovery cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick
Firmware Oppo N1 Mini Below

   Stock Rom Firmware Oppo N1 Mini


Tutorial Upgrade Oppo N1 Mini :

  1. Copy ****.zip to root folder of the phone SD card (no need to unzip).
  2. Turn off the phone, then keep pressing volume down + Power button until the robot icon appear, then press power button again
  3. Press the volume- to move up and down to choose“wipe data/factory reset”, then press volume+ button to confirm.
  4. Choose “yes—delete all user data”, then press volume+ button to enter the page as below.
  5. It will enter below page after finishing delete all user data.
  6. Then choose“apply update from sdcard”
  7. Find and select the ROM, press volume+ to enter the page as below.
  8. Please make sure the power is sufficient during the upgrading. It will showed as below when the upgrading finished.
  9. Choose “reboot system now”,then press volume+ button to reboot your phone.


Complate Oppo N1 Mini Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Oppo Find 7 / 7A Via Mode Recovery



Tutorial Flashing Update Stock Rom Firmware Oppo Find 7 / 7A Via Recovery cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick
Firmware Below

   Stock Rom Firmware Oppo Find 7 / 7A
 

Tutorial Upgrade Oppo Find 7 / 7A :

  1. Copy ****.zip to root folder of the phone SD card (no need to unzip).
  2. Turn off the phone, then keep pressing volume up + Power button until the robot icon appear, then press power button again
  3. Press the volume- to move up and down to choose“wipe data/factory reset”, then press volume+ button to confirm.
  4. Choose “yes—delete all user data”, then press volume+ button to enter the page as below.
  5. It will enter below page after finishing delete all user data.
  6. Then choose“apply update from sdcard”
  7. Find and select the ROM, press volume+ to enter the page as below.
  8. Please make sure the power is sufficient during the upgrading. It will showed as below when the upgrading finished.
  9. Choose “reboot system now”,then press volume+ button to reboot your phone.


Complate Oppo Find 7 / 7A Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Update Oppo R5 Via Recovery Mode


Tutorial Flashing Update Stock Rom Firmware Oppo R5 Via Recovery cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick
Before download reg or lohin at www.needrom.com

   Stock Rom Firmware Oppo R5
 

 Description About Firmware Oppo R5 :

  1. ROM Mobile OPPO R5 –Rom Android 4.4.4
  2. Official ROM OPPO R5 Version: R8107_11.A.09_009_150414
  3. Gapps not include –No Rooted
  4. Language support: EN/CN

Tutorial Upgrade Oppo R5 :

  1. Copy ****.zip to root folder of the phone SD card (no need to unzip).
  2. Turn off the phone, then keep pressing power button and volume+ button until the robot icon appear, then press power button again
  3. Press the volume- to move up and down to choose“wipe data/factory reset”, then press volume+ button to confirm.
  4. Choose “yes—delete all user data”, then press volume+ button to enter the page as below.
  5. It will enter below page after finishing delete all user data.
  6. Then choose“apply update from sdcard”
  7. Find and select the ROM, press volume+ to enter the page as below.
  8. Please make sure the power is sufficient during the upgrading. It will showed as below when the upgrading finished.
  9. Choose “reboot system now”,then press volume+ button to reboot your phone.


Complate Oppo R5 Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Oppo Joy 3 A11W Via SP Flashtool


How to Flash Stock Rom Firmware Oppo Joy 3 A11W using SP Flashtool cause damage to software, show application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of software. It can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Oppo Joy 3 A11W here
  6. All Stock Rom Oppo Smartphone from here

Tutorial Upgrade Oppo Joy 3 A11W:
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Oppo Joy 3 A11W Tutorial : How to Flashing Android Via SP Flashtool

How To Flashing Update Oppo R833T Via SP Flashtool


How to Flash Stock Rom Oppo R833T using SP Flashtool cause damage to software, show application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of software. It can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update:

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Reg Or Login at www.needrom.com
  6. Stock Rom, Firmware Oppo R833T here
  7. All Stock Rom Oppo Smartphone from here

Tutorial Upgrade Oppo R833T :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Android Via SP Flashtool

Blog Archive