How To Flashing Update LeTV LeEco Le 2 Marshmallow


Tutorial / How To Flashing Update Stock Rom LeTV LeEco Le 2 Marshmallow. cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:


Forget the lock code
Forgot password email
Application error
Often hangs
HardBrick

Required file needed Firmware LeEco Le 2


Stock Rom Firmware LeTV LeEco Le 2 Marshmallow


Tutorial Upgrade Stock Rom LeEco Le 2 :

  1. Download and Install Usb Driver LeEco Le 2 on your computer
  2. Download the multilingual EUI ROM LeEco Le 2
  3. Rename the zip file as update.zip, and copy it to the root directory of Internal storage
  4. Open the “File Manager” and click the firmware “update.zip” to upgrade firmware. Click “Update”
  5. Copy firmware “update.zip” to the root directory of the SD card
  6. Shutdown your device
  7. Press the "Volume+ key and the Power button" at the same time
  8. Wait until the screen wakes ,it will enter into the upgrade mode
  9. Finally, a picture, select the downloaded zip file. Wait for the upgrade is complete, reboot into the system

Once the script is finished running, your LeTV LeEco Le 2 device will reboot. After you finish

How To Flashing LeTV LeEco Le Max X900 Marshmallow


Tutorial / How To Flashing Update Stock Rom LeTV LeEco Le Max X900 Marshmallow. cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:


Forget the lock code
Forgot password email
Application error
Often hangs
HardBrick

Required file needed Firmware LeEco Le Max X900


Stock Rom Firmware LeTV LeEco Le Max X900


Tutorial Upgrade LeEco Le Max X900 :

  1. Download and Install Usb Driver LeEco Le Max X900 on your computer
  2. Download the multilingual EUI ROM LeEco Le Max X900
  3. Rename the zip file as update.zip, and copy it to the root directory of Internal storage
  4. Open the “File Manager” and click the firmware “update.zip” to upgrade firmware. Click “Update”
  5. Copy firmware “update.zip” to the root directory of the SD card
  6. Shutdown your device
  7. Press the "Volume+ key and the Power button" at the same time
  8. Wait until the screen wakes ,it will enter into the upgrade mode
  9. Finally, a picture, select the downloaded zip file. Wait for the upgrade is complete, reboot into the system

Once the script is finished running, your LeEco Le Max X900 device will reboot. After you finish

How To Flashing Firmware LeTV LeEco Le 1 Pro X800


Tutorial / How To Flashing Update Stock Rom LeTV LeEco Le 1 Pro X800 cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

Required file needed Firmware LeEco Le 1 Pro X800


Stock Rom Firmware LeTV LeEco Le 1 Pro X800


Tutorial Upgrade LeEco Le 1 Pro X800 :

  1. Download and Install Usb Driver LeEco Le 1 Pro X800 on your computer
  2. Download the multilingual EUI ROM LeEco Le 1 Pro X800
  3. Rename the zip file as update.zip, and copy it to the root directory of Internal storage
  4. Open the “File Manager” and click the firmware “update.zip” to upgrade firmware. Click “Update”
  5. Copy firmware “update.zip” to the root directory of the SD card
  6. Shutdown your device
  7. Press the "Volume+ key and the Power button" at the same time
  8. Wait until the screen wakes ,it will enter into the upgrade mode
  9. Finally, a picture, select the downloaded zip file. Wait for the upgrade is complete, reboot into the system

Once the script is finished running, your LeEco Le 1 Pro X800 device will reboot. After you finish

How To Flashing Firmware LeTV LeEco Le 1S X500


Tutorial / How To Flashing Update Stock Rom Firmware LeTV LeEco Le 1S X500 cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

Required file needed Firmware LeEco Le 1S X500


Stock Rom Firmware LeTV LeEco Le 1S X500


Tutorial Upgrade LeEco Le 1S X500 :

  1. Download and Install Usb Driver LeEco Le 1S X500 on your computer
  2. Download the multilingual EUI ROM LeEco Le 1S X500
  3. Rename the zip file as update.zip, and copy it to the root directory of Internal storage
  4. Open the “File Manager” and click the firmware “update.zip” to upgrade firmware. Click “Update”
  5. Copy firmware “update.zip” to the root directory of the SD card
  6. Shutdown your device
  7. Press the "Volume+ key and the Power button" at the same time
  8. Wait until the screen wakes ,it will enter into the upgrade mode
  9. Finally, a picture, select the downloaded zip file. Wait for the upgrade is complete, reboot into the system

Once the script is finished running, your LeEco Le 1S X500 device will reboot. After you finish

How To Flashing Update Stock Rom LeTV LeEco Le 1 X600


Tutorial / How To Flashing Update Stock Rom Firmware LeTV LeEco Le 1 X600 cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

Required file needed Firmware LeEco Le 1 X600


Stock Rom Firmware LeTV LeEco Le 1 X600


Tutorial Upgrade LeEco Le 1 X600 :

  1. Download and Install Usb Driver LeEco Le 1 X600 on your computer
  2. Download the multilingual EUI ROM LeEco Le 1 X600
  3. Rename the zip file as update.zip, and copy it to the root directory of Internal storage
  4. Open the “File Manager” and click the firmware “update.zip” to upgrade firmware. Click “Update”
  5. Copy firmware “update.zip” to the root directory of the SD card
  6. Shutdown your device
  7. Press the "Volume+ key and the Power button" at the same time
  8. Wait until the screen wakes ,it will enter into the upgrade mode
  9. Finally, a picture, select the downloaded zip file. Wait for the upgrade is complete, reboot into the system

Once the script is finished running, your LeEco Le 1 X600 device will reboot. After you finish

How To Flashing Firmware UMI C1 Via SP Flashtool


Tutorial Flashing Update Stock Rom Firmware UMI C1 Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools UMI C1
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom UMI C1 from here

  • Tutorial Update Firmware UMI C1
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

 

How To Flashing Update Firmware UMI Super Via SP Flashtool



Tutorial Flashing Update Stock Rom Firmware UMI Super Via SP Flashtool Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools UMI Super :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware UMI Super from here

  • Tutorial Update UMI Super :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Update Firmware UMI eMax Via SP Flashtool


Tutorial Flashing Update Stock Rom UMI eMax Via SP Flashtool Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools UMI eMax :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware UMI eMax from here

  • Tutorial Update UMI eMax :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Update UMI Iron Y900 Via SP Flashtool


Tutorial Flashing Update Stock Rom UMI Iron Y900 Via SP Flashtool Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools UMI Iron Y900 :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware UMI Iron Y900 from here

  • Tutorial Update UMI Iron Y900 :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Firmware UMI Hammer S Via SP Flashtool


Tutorial Flashing Update Stock Rom Firmware UMI Hammer S Via SP Flashtool Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools UMI Hammer S :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware UMI Hammer S from here

  • Tutorial Update UMI Hammer S :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Update UMI Touch Via SP Flashtool


Tutorial Flashing Update Stock Rom Firmware UMI Touch Via SP Flashtool Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools UMI Touch :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware UMI Touch from here

  • Tutorial Update UMI Touch :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Update UMI Rome X Via SP Flashtool


Tutorial Flashing Update Firmware UMI Rome X Via SP Flashtool Cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools UMI Rome X :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware UMI Rome X from here

  • Tutorial Update UMI Rome X :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.
  11.  

How To Flashing Update Tablet Nexus 9 LTE Marshmallow


Tutorial Flashing Update Stock Rom Firmware Nexus 9 LTE Android 6.0.1 cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

Forget the lock code
Forgot password email
Application error
Often hangs
HardBrick

  • Required file needed Firmware Nexus 9

Stock Rom Firmware Nexus 9 Marshmallow


Tutorial Upgrade Nexus 9 Marshmallow 6.0.1 :

  1. Download and Install Usb Driver Google Nexus 9 on your computer
  2. Download and Install ADB minimal and Fastboot Driver on your computer
  3. Download Google Nexus 5X firmware and extrack on your computer
  4. Enable usb debuging on your Nexus 9. open setting -> developers option -> usb debuging and tick to enable.
  5. Turn off your Nexus 9
  6. Now, start your nexus on Adb and Fastboot Mode. press and hold (volume up + volume down + power) until fastboot mode enable
  7. Connect your nexus on computer with usb cable
  8. Now, you need to unlock the bootloader, open MAF32.EXE or PY_CMD.EXE from fastboot folder (C:Program Files\Minimal adb and Fastboot)
  9. Command windows is launced, Give the following command fastboot oem unlock
  10. See warning message on your Nexus 9 and select volume up to continue
  11. Now, your Nexus 9 bootlader is unlock
  12. To flashing firmware Nexus 9, Open Flash-all.bat
  13. Flashing proses will begin, will take 5-10 minutes to complate

Once the script is finished running, your Nexus device will reboot. After you finish

How To Flashing Tablet Nexus 7 Android 6.0.0 Marshmallow


Tutorial Flashing Update Stock Rom Firmware Tablet Asus Nexus 7 Android 6.0.0 cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

Forget the lock code
Forgot password email
Application error
Often hangs
HardBrick

  • Required file needed Firmware Nexus 7

Stock Rom Firmware Asus Nexus 7 Marshmallow


Tutorial Upgrade Nexus 7 Marshmallow 6.0.0 :

  1. Download and Install Usb Driver Google Nexus 7 on your computer
  2. Download and Install ADB minimal and Fastboot Driver on your computer
  3. Download Google Nexus 7 firmware and extrack on your computer
  4. Enable usb debuging on your Nexus 7. open setting -> developers option -> usb debuging and tick to enable.
  5. Turn off your Nexus 7
  6. Now, start your nexus on Adb and Fastboot Mode. press and hold (volume up + volume down + power) until fastboot mode enable
  7. Connect your nexus on computer with usb cable
  8. Now, you need to unlock the bootloader, open MAF32.EXE or PY_CMD.EXE from fastboot folder (C:Program Files\Minimal adb and Fastboot)
  9. Command windows is launced, Give the following command fastboot oem unlock
  10. See warning message on your nexus 5x and select volume up to continue
  11. Now, your Nexus 7 bootlader is unlock
  12. To flashing firmware Nexus 7, Open Flash-all.bat
  13. Flashing proses will begin, will take 5-10 minutes to complate

Once the script is finished running, your Nexus device will reboot. After you finish

How To Flashing Firmware Nexus 6P Android 6.0.1 Marshmallow



Tutorial / How To Flashing Update Stock Rom Firmware Nexus 6P Android 6.0.1 Marshmallow cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

Required file needed Firmware Nexus 6P Android 6.0.1


Stock Rom Firmware Nexus 6P Marshmallow


Tutorial Upgrade Nexus 6P Android 6.0.1 Marshmallow :

  1. Download and Install Usb Driver Google Nexus 6P on your computer
  2. Download and Install ADB minimal and Fastboot Driver on your computer
  3. Download Google Nexus 6P firmware and extrack on your computer
  4. Enable usb debuging on your nexus 6P. open setting -> developers option -> usb debuging and tick to enable.
  5. Turn off your nexus 6P
  6. Now, start your nexus on Adb and Fastboot Mode. press and hold (volume up + volume down + power) until fastboot mode enable
  7. Connect your nexus on computer with usb cable
  8. Now, you need to unlock the bootloader, open MAF32.EXE or PY_CMD.EXE from fastboot folder (C:Program Files\Minimal adb and Fastboot)
  9. Command windows is launced, Give the following command fastboot oem unlock
  10. See warning message on your nexus 6P and select volume up to continue
  11. Now, your nexus 6P bootlader is unlock
  12. To flashing firmware Nexus 6P, Open Flash-all.bat
  13. Flashing proses will begin, will take 5-10 minutes to complate

Once the script is finished running, your Nexus device will reboot. After you finish

How To Flash Samsung Galaxy Note 4 SM-N910F Via Odin


Tutorial / How to Flashing Firmware Samsung Galaxy Note 4 SM-N910F Via Odin for download errors, application errors, the touchscreen is not sensitive, exposed to the virus internal memory, loading a boot loop, until the total death could be detected in a firmware update for the computer drivers. if possible you can also do a RESET Galaxy Note 4 SM-N910F by pressing three key combination. when the position device off press and hold the Vol Up + Home + Power until the picture android robot. then do wipe data users but sometimes this is not enough to help the HH is needed Flashing Update
  • Tool File needed :
  1. Usb driver Here or samsung kies Here
  2. Odin v3 Here
  3. Firmware Stock Rom Samsung Galaxy Note 4 SM-N910F Here
  • Tutorial Update Galaxy Note 4 :
  1. Install Usb Driver Samsung or Samsung Kies on your computer
  2. Extract the firmware Galaxy Note 4 SM-N910F with win rar to find .md5 file
  3. Turn off your galaxy. press and hold the Volume down + Home + Power for download mode and press volume up
  4. connect to a computer with a cable usb
  5. Open odin exe v3
  6. see odin whether in the column ID: COM colored blue
  7. If the ID: COM has blue means it's ready to stage flash process
  8. Click the PDA in Odin and navigate the firmware file in exktak and select the file name so N910FXXXXXXX.md5 
  9. Wait a minute until Odin success prepare files
  10.  Click START in Odin Wait until the process is complete (PASS) Restart Finish 

This Complate Tutorial Galaxy Note 4 SM-N910F : How to Flashing Samsung Via Odin3

How To Flashing Update LG Nexus 5X Marshmallow 6.0.1


Tutorial Flashing Update Stock Rom Firmware Nexus 5X Android 6.0.1 cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

Forget the lock code
Forgot password email
Application error
Often hangs
HardBrick

  • Required file needed Firmware LG Nexus 5X

Stock Rom Firmware LG Nexus 5X Marshmallow


Tutorial Upgrade Nexus 5X Marshmallow 6.0.1 :

  1. Download and Install Usb Driver Google Nexus 5X on your computer
  2. Download and Install ADB minimal and Fastboot Driver on your computer
  3. Download Google Nexus 5X firmware and extrack on your computer
  4. Enable usb debuging on your Nexus 5X. open setting -> developers option -> usb debuging and tick to enable.
  5. Turn off your Nexus 5X
  6. Now, start your nexus on Adb and Fastboot Mode. press and hold (volume up + volume down + power) until fastboot mode enable
  7. Connect your nexus on computer with usb cable
  8. Now, you need to unlock the bootloader, open MAF32.EXE or PY_CMD.EXE from fastboot folder (C:Program Files\Minimal adb and Fastboot)
  9. Command windows is launced, Give the following command fastboot oem unlock
  10. See warning message on your nexus 5x and select volume up to continue
  11. Now, your Nexus 5X bootlader is unlock
  12. To flashing firmware Nexus 5X, Open Flash-all.bat
  13. Flashing proses will begin, will take 5-10 minutes to complate

Once the script is finished running, your Nexus device will reboot. After you finish

How To Flash Firmware LG Nexus 5 Lollipop Android 6.0.1


Tutorial Flashing Update Stock Rom Firmware LG Nexus 4 Android 6.0.1 Lollipop cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

Forget the lock code
Forgot password email
Application error
Often hangs
HardBrick

For Required file needed Firmware LG Nexus 5 Marshmallow
 
Stock Rom Firmware LG Nexus 5 Marshmallow


Tutorial Upgrade Nexus 5 Android 6.0.1 :

  1. Download and Install Usb Driver Google Nexus 5 on your computer
  2. Download and Install ADB minimal and Fastboot Driver on your computer
  3. Download Google Nexus 5 firmware and extrack on your computer
  4. Enable usb debuging on your nexus 5. open setting -> developers option -> usb debuging and tick to enable.
  5. Turn off your nexus 5
  6. Now, start your nexus on Adb and Fastboot Mode. press and hold (volume up + volume down + power) until fastboot mode enable
  7. Connect your nexus on computer with usb cable
  8. Now, you need to unlock the bootloader, open MAF32.EXE or PY_CMD.EXE from fastboot folder (C:Program Files\Minimal adb and Fastboot)
  9. Command windows is launced, Give the following command fastboot oem unlock
  10. See warning message on your nexus 5 and select volume up to continue
  11. Now, your nexus 5 bootlader is unlock
  12. To flashing firmware Nexus 5, Open Flash-all.bat
  13. Flashing proses will begin, will take 5-10 minutes to complate

Once the script is finished running, your Nexus device will reboot. After you finish

How To Flashing Update Firmware LG Nexus 4 Lollipop


Tutorial Flashing Update Stock Rom Firmware LG Nexus 4 Android 5.1.1 Lollipop cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

Required file needed Firmware LG Nexus 4 Lollipop
 

Stock Rom Firmware LG Nexus 4


Tutorial Upgrade Nexus 4 Android 5.1.1 Lollipop :

  1. Download and Install Usb Driver Google Nexus 4 on your computer
  2. Download and Install ADB minimal and Fastboot Driver on your computer
  3. Download Google Nexus 4 firmware and extrack on your computer
  4. Enable usb debuging on your nexus 4. open setting -> developers option -> usb debuging and tick to enable.
  5. Turn off your nexus 4
  6. Now, start your nexus on Adb and Fastboot Mode. press and hold (volume up + volume down + power) until fastboot mode enable
  7. Connect your nexus on computer with usb cable
  8. Now, you need to unlock the bootloader, open MAF32.EXE or PY_CMD.EXE from fastboot folder (C:Program Files\Minimal adb and Fastboot)
  9. Command windows is launced, Give the following command fastboot oem unlock
  10. See warning message on your nexus 4 and select volume up to continue
  11. Now, your nexus 4 bootlader is unlock
  12. To flashing firmware Nexus 4, Open Flash-all.bat
  13. Flashing proses will begin, will take 5-10 minutes to complate

Once the script is finished running, your Nexus device will reboot. After you finish

How To Flashing Update Nexus 6 Marshmallow 6.0.1 Stock Rom


Tutorial Flashing Update Stock Rom Firmware Nexus 6 Android 6.0.1 Marshmallow cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of softwareIt can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

Required file needed Firmware nexus 6 android 6.0.1 Marshmallow
 

Stock Rom Firmware Nexus 6 Marshmallow (mmb29k)
Stock Rom Firmware Nexus 6 Marshmallow (mmb29q)
Stock Rom Firmware Nexus 6 Marshmallow (mmb29s)



Tutorial Upgrade Nexus 6 Marshmallow :

  1. Download and Install Usb Driver Google Nexus 6 on your computer
  2. Download and Install ADB minimal and Fastboot Driver on your computer
  3. Download Google Nexus 6 firmware and extrack on your computer
  4. Enable usb debuging on your nexus 6. open setting -> developers option -> usb debuging and tick to enable.
  5. Turn off your nexus 6
  6. Now, start your nexus on Adb and Fastboot Mode. press and hold (volume up + volume down + power) until fastboot mode enable
  7. Connect your nexus on computer with usb cable
  8. Now, you need to unlock the bootloader, open MAF32.EXE or PY_CMD.EXE from fastboot folder (C:Program Files\Minimal adb and Fastboot)
  9. Command windows is launced, Give the following command fastboot oem unlock
  10. See warning message on your nexus 6 and select volume up to continue
  11. Now, your nexus 6 bootlader is unlock
  12. To flashing firmware Nexus 6, Open Flash-all.bat
  13. Flashing proses will begin, will take 5-10 minutes to complate

Once the script is finished running, your Nexus device will reboot. After you finish.

Blog Archive