How To Flashing Firmware Cubot GT88 Via SP Flashtool


Tutorial Flashing Update Firmware Rom Cubot GT88 Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Cubot GT88 :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Cubot GT88 from here

  • Tutorial Update Firmware Cubot GT88 :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will eappear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

How To Flashing Firmware Cubot C10+ Via SP Flashtool


Tutorial Flashing Update Firmware Rom Cubot C10+ Plus Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Cubot C10+ Plus :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Cubot C10+ Plus from here

  • Tutorial Update Firmware Cubot C10+ :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will eappear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

How To Flashing Firmware Cubot C9W Via SP Flashtool


Tutorial Flashing Update Firmware Rom Cubot C9W Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Cubot C9W :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Cubot C9W from here

  • Tutorial Update Firmware Cubot C9W :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

How To Flashing Firmware Cubot A6589 Via SP Flashtool


Tutorial Flashing Update Firmware Rom Cubot A6589 Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Cubot A6589 :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Cubot A6589 from here

  • Tutorial Update Firmware Cubot A6589 :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

How To Flashing Update Coolpad Note 3 Plus Via SP Flashtool


Tutorial Flashing Update Firmware Rom Coolpad Note 3 Plus Via SP Flashtool cause software damage due to an error that we could do alone. for example, the process of rooting failure or installing applications that bring wallware or viruscould lead to weaker performance of mobile phones, until Hardbrickbut as long as it is detected in the computer driveryou can still correct it by re-install the firmware. or if it still lets you also can perform recovery mode or reset the user databut sometimes the damage is not quite in this way. You also need to update your Android phone.


  • The following tools Coolpad Note 3 Plus :
  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Coolpad Note 3 Plus from here

  • Tutorial Update Firmware Coolpad Note 3 Plus :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.

How To Flashing Update Intex Aqua M5 Via SP Flashtool








How to Flash Stock Rom Firmware Intex Aqua M5 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of software. It can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Intex Aqua M5 :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Intex Aqua M5 from here

Tutorial Upgrade Intex Aqua M5 :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Intex Aqua M5 Via SP Flashtool

How To Flashing Update Intex Aqua Lite Lollipop Via SP Flashtool


How to Flash Stock Rom Firmware Intex Aqua Lite Lollipop using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of software. It can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Intex Aqua Lite Lollipop :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Intex Aqua Lite Lollipop from here

Tutorial Upgrade Intex Aqua Lite Lollipop :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Intex Aqua Lite Lollipop Via SP Flashtool

How To Flashing Update Intex Aqua Life V Via Flashtool


How to Flash Stock Rom Firmware Intex Aqua Life V using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of software. It can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Intex Aqua Life V :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Intex Aqua Life V from here

Tutorial Upgrade Intex Aqua Life V :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Intex Aqua Life V Via SP Flashtool

How To Flashing Intex Aqua Life 3 Via SP Flashtool


How to Flash Stock Rom Firmware Intex Aqua Life 3 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of software. It can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Intex Aqua Life 3 :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Intex Aqua Life 3 from here

Tutorial Upgrade Intex Aqua Life 3 :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Intex Aqua Life 3 Via SP Flashtool

How To Flashing Update Intex Aqua Life / Aqua Life 2 Via SP Flashtool


How to Flash Stock Rom Firmware Intex Aqua Life / Intex Aqua Life 2 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of software. It can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Intex Aqua Life / Intex Aqua Life 2 :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Intex Aqua Life from here
  6. Stock Rom Firmware Intex Aqua Life 2 from here



Tutorial Upgrade Intex Aqua Life / Intex Aqua Life 2 :

  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Intex Aqua Life Via SP Flashtool

How To Flashing Update Intex Aqua Kat Via SP Flashtool


How to Flash Stock Rom Firmware Intex Aqua Kat using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of software. It can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Intex Aqua Kat :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Intex Aqua Kat from here

Tutorial Upgrade Intex Aqua Kat :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Intex Aqua Kat Via SP Flashtool

How To Flashing Update Intex Aqua Joy Via SP Flashtool


How to Flash Stock Rom Firmware Intex Aqua Joy Lollipop using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of software. It can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Intex Aqua Joy :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Intex Aqua Joy Lollipop from here

Tutorial Upgrade Intex Aqua Joy :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Intex Aqua Joy Via SP Flashtool

How To Flashing Update Intex Aqua i15 Via SP Flashtool


How to Flash Stock Rom Firmware Intex Aqua i15 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of software. It can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Intex Aqua i15 :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Intex Aqua i15 from here

Tutorial Upgrade Intex Aqua i15 :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Intex Aqua i15 Via SP Flashtool

How To Flashing Update Intex Aqua i14 Firmware Via SP Flashtool


How to Flash Stock Rom Firmware Intex Aqua i14 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of software. It can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Intex Aqua i14 :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Intex Aqua i14 from here

Tutorial Upgrade Intex Aqua i14 :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Intex Aqua i14 Via SP Flashtool

How To Flashing Intex Aqua i7 Firmware Via SP Flashtool


How to Flash Stock Rom Firmware Intex Aqua i7 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of software. It can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update All Intex i7 :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Intex Aqua i7 from here

Tutorial Upgrade Intex Aqua i7 :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Intex Aqua i7 Via SP Flashtool

How To Flashing Update Intex Aqua i6 Via SP Flashtool


How to Flash Stock Rom Firmware Intex Aqua i6 using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of software. It can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update All Intex i6 :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Intex Aqua i6 from here

Tutorial Upgrade Intex Aqua i6 :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Intex Aqua i6 Via SP Flashtool

How To Flashing Update Intex i5 Firmware Via SP Flashtool


How to Flash Stock Rom Firmware Intex i5 / Intex i5 HD / Intex i5 Mini / Intex i5 Octa using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of software. It can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update All Intex i5 :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Intex Aqua i5 from here
  6. Stock Rom Firmware Intex Aqua i5 HD from here
  7. Stock Rom Firmware Intex Aqua i5 Mini from here
  8. Stock Rom Firmware Intex Aqua i5 Octa from here

Tutorial Upgrade All Intex i5 :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing All Intex i5 Via SP Flashtool

How To Flashing Intex Aqua i4 / i4 Plus Via SP Flashtool


How to Flash Stock Rom Firmware Intex Aqua i4 / i4 Plus using SP Flashtool cause damage to software, application error, the touch screen does not work, the initial loading is not completed or bootloop and errors due to root damage and various kinds of software. It can be fixed by updating the firmware or flash reset, the total space is full. Ram's performance resulted in slowing down and making Android damaged software or in many cases the initial loading can not get into the main menu. but do not worry there are plenty of cases of damage to software that can be resolved by Flashing repeated them:

  • Forget the lock code
  • Forgot password email
  • Application error
  • Often hangs
  • HardBrick

 The following equipment before the update Intex Aqua i4 / i4+ :

  1. SP Flashtool Version 5 from here
  2. Mtk tool and root droid from here
  3. MT65xx usb driver from here
  4. MT6577 driver usb vcom from here
  5. Stock Rom Firmware Intex Aqua i4 from here
  6. Stock Rom Firmware Intex Aqua i4 Plus from here

Tutorial Upgrade Intex Aqua i4 / i4+ Plus :
  1. Download and extract the SP Flash Tool and Mediatek USB VCOM drivers
  2. Install the driver if not already installed
  3. Download and extract your ROM package and find the scatter.txt file.
  4. Run Flash_tool.exe then click Scatter-loading button to load the correct scatter file
  5. Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
  6.  Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
  7. After the red progress bar is complete, there will appear a purple progress bar.
  8. Right after the purple progress bar is complete, a message will appear underneath it:
    “Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
  9. When the yellow bar is complete, you'll get a popup with a green circle and Download OK message, which means that the process has been successfully terminated.
  10. You can now safely disconnect your phone and turn it on. The process ends here.


Complate Tutorial : How to Flashing Intex Aqua i4 / i4 Plus Via SP Flashtool

Blog Archive